Why door count, not room size, sets the price of refacing a 10x10 kitchen
A 10x10 kitchen describes floor dimensions. Two rooms with the same footprint can hold very different cabinet runs. One might have a single row of lowers and a few uppers. Another might have a floor-to-ceiling pantry, a bank of narrow drawers, and a corner unit with two doors.
Refacing replaces every door and drawer front, so each extra front adds material and fitting time. That is why the St. Albert refacing tiers are written in doors, not square feet. The RenoQuotes 2026 refacing cost guide for Canada says a standard kitchen usually has 15 to 20 doors and drawer fronts, and it names cabinets that run to the ceiling, corner cabinets, and crown moulding as items that add installation complexity. RenoQuotes does not tie that count to a 10x10 room, so treat it as a general reference, not a measurement of yours.
10x10 kitchen refacing cost by door count in St. Albert
Find the row that matches the number of fronts in your 10x10 room.
| Doors and drawer fronts | Refacing tier | 2026 St. Albert price | Time |
|---|---|---|---|
| 10 to 20Fewer uppers, no pantry | Small kitchen | $5,000 to $7,000 | 5 to 7 days |
| 20 to 30The most common refacing job | Average kitchen | $7,000 to $9,000 | Confirmed at the quote |
| 30 to 50+Includes island cabinetry | Executive kitchen | $9,000 to $12,000 | 10 to 14 days |
If a 10x10 room also has an island with cabinets, count the island doors and drawers too. St. Albert refacing is priced on the same terms as Edmonton, with no travel surcharge.
How to count the doors and drawer fronts in your kitchen
A careful count takes a few minutes and tells you which tier to expect before anyone visits.
- Walk the upper cabinets left to right and count every hinged door. A double-door cabinet counts as two.
- Do the same for the lower cabinets, including the doors under the sink.
- Count each drawer front on its own. A bank of four drawers is four fronts.
- Add the pantry, the cabinet above the fridge, and any tall unit beside the oven.
- Add the island or peninsula fronts if you have them.
Write the total down along with the material. Thermofoil, laminate, and solid wood lead to different recommendations, which the guide to refinishing vs refacing vs replacing covers.
10x10 kitchen refacing vs painting vs replacing costs
For a 10x10 room with 10 to 20 fronts, here is how the four options compare in St. Albert in 2026.
| Option for 10 to 20 fronts | 2026 price | Time | Fits when |
|---|---|---|---|
| Cabinet painting | $3,000 to $4,500 | 5 to 7 days | Doors are sound, colour is dated |
| Cabinet refinishing | $4,000 to $6,000 | Confirmed at the quote | Solid wood with a worn finish |
| Cabinet refacing | $5,000 to $7,000 | 5 to 7 days | Peeling thermofoil or an unwanted door style |
| New cabinets | $20,000 to $40,000+ | 4 to 8 weeks | Water-damaged boxes or a new layout |
National 10x10 kitchen refacing figures in Canada
National guides give lower starting numbers, and they measure differently. RenoQuotes puts refacing for an average-sized Canadian kitchen at $2,500 to $8,500 installed, with material setting the spread: $80 to $160 per linear foot for melamine or laminate and $220 to $450+ per linear foot for wood veneer or solid wood. The HomeStars kitchen cabinets cost guide puts a full refacing job at $5,000 to $12,000.
A linear-foot quote measures the length of the cabinet run. A door-count quote measures the number of fronts. The two can land far apart for the same 10x10 room, so ask every company for its front count and door material before you compare totals. The guide to the cheapest way to reface lays out the full material table.
Key takeaway: Most 10x10 refacing prices in St. Albert fall between $5,000 and $9,000, depending on whether the room has 10 to 20 or 20 to 30 fronts. Count yours, then call 587-817-6477 or send your count through the quote form for a written price.
What else changes a 10x10 refacing quote
Door style
Door style is one of the three factors that set a refacing price. A plain slab or shaker front and a detailed profile can land at different points within the same tier.
Hardware
Doors and drawers go back on with new or existing hardware. Reusing sound hardware keeps the price lower.
Box condition
Refacing depends on boxes that are square and sound. Particleboard and MDF boxes under failing thermofoil usually are. A sink base swollen by a leak needs attention before new doors go on.
Get a 10x10 refacing price near me in St. Albert
Cabinet Refinishing St. Albert provides a free in-home consultation and a detailed written estimate covering prep, products, and labour, and the quoted price is the price you pay. Work is done by in-house crews with a 5-year written workmanship warranty. See kitchen cabinet refacing in St. Albert for the service, or the 2026 cabinet cost guide for every tier.